Fraction to decimal chart
| Mark | Fraction | Decimal inch | 3 places | Millimeters |
|---|---|---|---|---|
| 1⁄64" | .0156 | .016 | 0.40 | |
| 1⁄32" | .0312 | .031 | 0.79 | |
| 3⁄64" | .0469 | .047 | 1.19 | |
| 1⁄16" | .0625 | .062 | 1.59 | |
| 5⁄64" | .0781 | .078 | 1.98 | |
| 3⁄32" | .0938 | .094 | 2.38 | |
| 7⁄64" | .1094 | .109 | 2.78 | |
| 1⁄8" | .1250 | .125 | 3.17 | |
| 9⁄64" | .1406 | .141 | 3.57 | |
| 5⁄32" | .1562 | .156 | 3.97 | |
| 11⁄64" | .1719 | .172 | 4.37 | |
| 3⁄16" | .1875 | .188 | 4.76 | |
| 13⁄64" | .2031 | .203 | 5.16 | |
| 7⁄32" | .2188 | .219 | 5.56 | |
| 15⁄64" | .2344 | .234 | 5.95 | |
| 1⁄4" | .2500 | .250 | 6.35 | |
| 17⁄64" | .2656 | .266 | 6.75 | |
| 9⁄32" | .2812 | .281 | 7.14 | |
| 19⁄64" | .2969 | .297 | 7.54 | |
| 5⁄16" | .3125 | .312 | 7.94 | |
| 21⁄64" | .3281 | .328 | 8.33 | |
| 11⁄32" | .3438 | .344 | 8.73 | |
| 23⁄64" | .3594 | .359 | 9.13 | |
| 3⁄8" | .3750 | .375 | 9.52 | |
| 25⁄64" | .3906 | .391 | 9.92 | |
| 13⁄32" | .4062 | .406 | 10.32 | |
| 27⁄64" | .4219 | .422 | 10.72 | |
| 7⁄16" | .4375 | .438 | 11.11 | |
| 29⁄64" | .4531 | .453 | 11.51 | |
| 15⁄32" | .4688 | .469 | 11.91 | |
| 31⁄64" | .4844 | .484 | 12.30 | |
| 1⁄2" | .5000 | .500 | 12.70 | |
| 33⁄64" | .5156 | .516 | 13.10 | |
| 17⁄32" | .5312 | .531 | 13.49 | |
| 35⁄64" | .5469 | .547 | 13.89 | |
| 9⁄16" | .5625 | .562 | 14.29 | |
| 37⁄64" | .5781 | .578 | 14.68 | |
| 19⁄32" | .5938 | .594 | 15.08 | |
| 39⁄64" | .6094 | .609 | 15.48 | |
| 5⁄8" | .6250 | .625 | 15.88 | |
| 41⁄64" | .6406 | .641 | 16.27 | |
| 21⁄32" | .6562 | .656 | 16.67 | |
| 43⁄64" | .6719 | .672 | 17.07 | |
| 11⁄16" | .6875 | .688 | 17.46 | |
| 45⁄64" | .7031 | .703 | 17.86 | |
| 23⁄32" | .7188 | .719 | 18.26 | |
| 47⁄64" | .7344 | .734 | 18.65 | |
| 3⁄4" | .7500 | .750 | 19.05 | |
| 49⁄64" | .7656 | .766 | 19.45 | |
| 25⁄32" | .7812 | .781 | 19.84 | |
| 51⁄64" | .7969 | .797 | 20.24 | |
| 13⁄16" | .8125 | .812 | 20.64 | |
| 53⁄64" | .8281 | .828 | 21.03 | |
| 27⁄32" | .8438 | .844 | 21.43 | |
| 55⁄64" | .8594 | .859 | 21.83 | |
| 7⁄8" | .8750 | .875 | 22.22 | |
| 57⁄64" | .8906 | .891 | 22.62 | |
| 29⁄32" | .9062 | .906 | 23.02 | |
| 59⁄64" | .9219 | .922 | 23.42 | |
| 15⁄16" | .9375 | .938 | 23.81 | |
| 61⁄64" | .9531 | .953 | 24.21 | |
| 31⁄32" | .9688 | .969 | 24.61 | |
| 63⁄64" | .9844 | .984 | 25.00 | |
| 1" | 1.0000 | 1.000 | 25.40 |
Questions
How do you turn an inch fraction into a decimal?
Divide the top number by the bottom number. 5/16 is 5 ÷ 16 = 0.3125 inch. To get millimeters, multiply the decimal by 25.4: 0.3125 × 25.4 = 7.94 mm.
What is 3/8 as a decimal?
3/8 inch is 0.375 inch, or 9.525 mm.
Why are some rows bold?
The bold rows are eighths of an inch (1/8, 1/4, 3/8 and so on). They are the marks you read most on a tape measure and the most common drill and bolt sizes.
Is the millimeter column exact?
Yes. One inch is defined as exactly 25.4 mm, so every value is exact before rounding to two places.
More free charts
Sources
Measure Drill checks every number against these references or works it out from the exact definitions of the units.



