Sheet metal gauge chart
| Gauge | Steel in | mm | Galvanized in | mm | Stainless in | mm | Aluminum in | mm |
|---|---|---|---|---|---|---|---|---|
| 7 | .1793 | 4.56 | – | .1875 | 4.76 | .1443 | 3.66 | |
| 8 | .1644 | 4.18 | .1681 | 4.27 | .1719 | 4.37 | .1285 | 3.26 |
| 9 | .1495 | 3.80 | .1532 | 3.89 | .1562 | 3.97 | .1144 | 2.91 |
| 10 | .1345 | 3.42 | .1382 | 3.51 | .1406 | 3.57 | .1019 | 2.59 |
| 11 | .1196 | 3.04 | .1233 | 3.13 | .1250 | 3.17 | .0907 | 2.30 |
| 12 | .1046 | 2.66 | .1084 | 2.75 | .1094 | 2.78 | .0808 | 2.05 |
| 13 | .0897 | 2.28 | .0934 | 2.37 | .0938 | 2.38 | .0720 | 1.83 |
| 14 | .0747 | 1.90 | .0785 | 1.99 | .0781 | 1.98 | .0641 | 1.63 |
| 15 | .0673 | 1.71 | .0710 | 1.80 | .0703 | 1.79 | .0571 | 1.45 |
| 16 | .0598 | 1.52 | .0635 | 1.61 | .0625 | 1.59 | .0508 | 1.29 |
| 17 | .0538 | 1.37 | .0575 | 1.46 | .0563 | 1.43 | .0453 | 1.15 |
| 18 | .0478 | 1.21 | .0516 | 1.31 | .0500 | 1.27 | .0403 | 1.02 |
| 19 | .0418 | 1.06 | .0456 | 1.16 | .0437 | 1.11 | .0359 | 0.91 |
| 20 | .0359 | 0.91 | .0396 | 1.01 | .0375 | 0.95 | .0320 | 0.81 |
| 21 | .0329 | 0.84 | .0366 | 0.93 | .0344 | 0.87 | .0285 | 0.72 |
| 22 | .0299 | 0.76 | .0336 | 0.85 | .0312 | 0.79 | .0253 | 0.64 |
| 23 | .0269 | 0.68 | .0306 | 0.78 | .0281 | 0.71 | .0226 | 0.57 |
| 24 | .0239 | 0.61 | .0276 | 0.70 | .0250 | 0.64 | .0201 | 0.51 |
| 25 | .0209 | 0.53 | .0247 | 0.63 | .0219 | 0.56 | .0179 | 0.45 |
| 26 | .0179 | 0.46 | .0217 | 0.55 | .0187 | 0.48 | .0159 | 0.40 |
| 27 | .0164 | 0.42 | .0202 | 0.51 | .0172 | 0.44 | .0142 | 0.36 |
| 28 | .0149 | 0.38 | .0187 | 0.47 | .0156 | 0.40 | .0126 | 0.32 |
| 29 | .0135 | 0.34 | .0172 | 0.44 | .0141 | 0.36 | .0113 | 0.29 |
| 30 | .0120 | 0.30 | .0157 | 0.40 | .0125 | 0.32 | .0100 | 0.25 |
Questions
How thick is 16 gauge steel?
0.0598 inch, or 1.52 mm. 16 gauge galvanized is 0.0635", stainless is 0.0625" and aluminum is 0.0508".
Why is a higher gauge thinner?
Gauge numbers come from old weight based systems: the bigger the number, the lighter and thinner the sheet.
Which gauge system is used for each metal?
Steel uses the Manufacturers' Standard Gauge, galvanized adds the zinc coating, stainless uses the U.S. Standard Gauge, and aluminum uses the Brown and Sharpe (American Wire) gauge.
Is a real sheet exactly this thickness?
No. Mills are allowed a small tolerance, often a few thousandths of an inch. Measure with calipers or a micrometer when it matters.
More free charts
Sources
Measure Drill checks every number against these references or works it out from the exact definitions of the units.
- Machinery's Handbook (Industrial Press), drill, thread and fastener tables
- NIST Special Publication 811, Appendix B: Conversion factors



